Gearwire Forums Visit the Gearwire.com main site for video demos, interviews, NAMM and AES coverage, the Gearwire Crosstalk podcast, and much, much more.

Go Back   Gearwire Forums > Guitar > Electric guitars

Electric guitars Axes, amps, and FX. Strings, cables, and accessories. Tubes and tuning pegs. Stacks and combos. Care and maintenance. Pedalboards and Pods. Getting sounds. Compressors, flangers, fuzz boxes, delays.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-2006, 02:18 PM
Whoopysnorp Whoopysnorp is offline
Gold Sputtered
 
Join Date: 2005
Posts: 384
Rep Power: 3
Whoopysnorp is tabula rasa
Default Who knows tricks about setting up guitars?

I've got this Agile Les Paul knockoff that I really like for the most part, but it doesn't quite intonate right. The main problem is the low E string, on which I constantly bottom out the adjustment of the saddle and still need more string length to get it to intonate properly. This is also a problem on the G string to some extent, and looking at it now I see that I have the B and high E bottomed out as well but if I remember right I was just barely able to intonate those correctly. Is there some kind of magical thing I can do with the truss rod or something to get that to work better, or is the bridge itself installed just a bit too far towards the neck?
Reply With Quote
  #2  
Old 10-12-2006, 03:04 PM
GearJunkie GearJunkie is offline
Decliner of Grammies
 
Join Date: 2005
Posts: 454
Rep Power: 4
GearJunkie is tabula rasa
Default

it could be that you're using an Agile Les Paul knock off.

</snobbery>
Reply With Quote
  #3  
Old 10-12-2006, 03:04 PM
Nubus Nubus is offline
FOG Emeritus
 
Join Date: 2005
Posts: 1,022
Rep Power: 5
Nubus is tabula rasa
Default

Quote:
Originally Posted by Whoopysnorp
I've got this Agile Les Paul knockoff that I really like for the most part, but it doesn't quite intonate right. The main problem is the low E string, on which I constantly bottom out the adjustment of the saddle and still need more string length to get it to intonate properly. This is also a problem on the G string to some extent, and looking at it now I see that I have the B and high E bottomed out as well but if I remember right I was just barely able to intonate those correctly. Is there some kind of magical thing I can do with the truss rod or something to get that to work better, or is the bridge itself installed just a bit too far towards the neck?
Does it have a tune-a-matic bridge? If so you could raise it up a modicum on that side only and see if that works. I would imagine it would
edit- I'm not sure if raising it is correct - maybe lowering is the right way

Last edited by Nubus; 10-12-2006 at 03:29 PM.
Reply With Quote
  #4  
Old 10-12-2006, 04:28 PM
Whoopysnorp Whoopysnorp is offline
Gold Sputtered
 
Join Date: 2005
Posts: 384
Rep Power: 3
Whoopysnorp is tabula rasa
Default

Quote:
Originally Posted by Nubus
Does it have a tune-a-matic bridge? If so you could raise it up a modicum on that side only and see if that works. I would imagine it would
edit- I'm not sure if raising it is correct - maybe lowering is the right way
That screws up my action though.

Quote:
Originally Posted by GearJunkie
it could be that you're using an Agile Les Paul knock off.

</snobbery>
Um...duh. I know that; I'm trying to figure out a way to fix it.
Reply With Quote
  #5  
Old 10-13-2006, 10:49 AM
Nubus Nubus is offline
FOG Emeritus
 
Join Date: 2005
Posts: 1,022
Rep Power: 5
Nubus is tabula rasa
Default

Some people use shims in places like the nut or in the space between the neck and the body, but I'm not a fan. Sometimes I'll bang around on the guitar with the handle of a screwdriver and see what happens.
Reply With Quote
  #6  
Old 02-03-2007, 10:04 PM
subsonic bob subsonic bob is offline
User of Presets
 
Join Date: 2007
Posts: 18
Rep Power: 0
subsonic bob is tabula rasa
Default

Sometimes turning the saddles around will give you more length for intonation. Is your neck adjusted right? maybe it is because you got a knock off.
Reply With Quote
  #7  
Old 03-04-2007, 04:40 AM
Robin Hood Robin Hood is offline
Noob
 
Join Date: 2007
Posts: 3
Rep Power: 0
Robin Hood is tabula rasa
Default

What i have encountered quite a lot---> Most of the time when you get just ONE string that gives trouble,

1) replace it..Ive seen "dud" strings that will make you want to break your guitar out of frustration, and in the mean time...its the string

2) If it looks as if the saddle is going "beyond" the bridge, tighten the truss-rod a little and re-tune...you'll notice most ( if not all ) of the saddles will then have to be moved forward a little...


You get this quite a lot on "new" guitars as they tend to still be "running in"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:40 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 2.4.5 © 2005-2006, Crawlability, Inc.
Gearwire Forums